Stainless steel round bar dia. 0.63" (5⁄8"), length 39.37" (39 3⁄8")

Stainless steel 1.4301 – poles with the diameter of 16 mm, length 1 m.
In stock
We'll send today
Last items in stock
13057.P
8595133928984
$23.50/pc

Parameters

Material stainless steel DIN 1.4301 /AISI 304 / ČSN 1724 0
Diameter D (mm) 16 mm
Surface treatment By pickling
Length (m) 1
Weight 1.58
Weight 3.48
Warning We only sell 1-metre long stainless steel rods, if you order 3 metres, you will receive three 1-metre long rods.

Supplementary letter

This is a basic, stainless austenitizated steel (so called food industry steel) containing 18 % of chromium (Cr) and 10 % of nickel (Ni). Chemical composition meets the standard treating a utilization of products for food industry and drinking water. Maximum temperature is 450 °C. This alloyed, noble steel is characterized by a good resistance against corrosion in the water and air mediums, without a concentration of chlorides and/or inorganic acids and salts. Surface corrosion resistance may be increased by polishing. Stainless steel 1.4301 is workable and possible to be welded to a great extent.

This stainless steel type has the following parameters:

  • It is possible to be welded (in the weld area it tends to an inter-crystalline corrosion).
  • Splinter-workable quite well.
  • Possible to be polished.
  • Alloying Cr 17 – 19.5 %, Ni 8 – 10.5 %, C < 0.07 %.
  • Tensile strength Rm 520 - 720 N/mm2.
  • Yield strength Rp 0.2 min. 210 N/mm2.

16 of other products in the same category: